How to Login a UTT Router via Wireless on Windows 10

Introduction
This is a tutorial for users to setup the router via wireless at the first time.
 
Prerequisites
a UTT Business Router (hereinafter shorted as “the Router"), such as UTT router N518W, AC750W, AC750GW and AC1220GW. Firmware Version: 3.0.0 or above
 
Configuration
1. Click the wireless button on the downright of the screen, connect to the default SSID begin with UTT-HIPER_xxxx.
  
 
2. Open with a browser and enter 192.168.1.1 at the search bar. Login with the default username: admin, password: admin.
 
3. System will acknowledge you to change administrator password for the first time.
 
4. Follow the Setup Wizard to configure basic settings, click Next by steps.
 
5. To configure Internet access of WAN, check the connection type with the ISP.
 
6. To configure SSID and password of wireless, then click Save to finish Setup Wizard.
 
Check this on other operation system
 
Relevant Articles